How do you mix Tordon herbicide?

For aerial application, add oil to the total spray mix at the ratio of 1 part oil to 5 parts water (1:5 ratio). For ground application, add oil to the spray mix at a rate of 5 to 10% of the total mix. Do not use more than 1 gallon of oil per acre for aerial or ground application.

How do you dilute a Tordon?

Tordon RTU is a ready-to-use herbicide manufactured by Dow AgroSciences an applied as a cut surface treatment. Since it is ready-to-use, Tordon RTU does not need to be diluted or mixed with water or any other liquid.

How do you use Tordon?

Tordon works the best when used in the right way. Expose the living outer ring of a tree by cutting it down or removing the bark. Apply Tordon to the outer ring or newly exposed cambium within 30 minutes of cutting. Use only enough Tordon to wet the living outer ring of the tree, avoiding any runoff.

How do you kill trees with Tordon?

Simply apply the Tordon around the outer ring of a cut tree stump using a sponge applicator. This Tordon RTU product even contains a colored dye to clearly mark stumps and brush that have been treated. Tordon is a more effective tree and stump killing herbicide than Roundup.

Can you spray Tordon on leaves?

Crews apply Tordon to unwanted vegeta- tion through a variety of application techniques. Foliar applications spray solution on the plant’s leaves, while cut-stubble applications are used to keep mowed brush from resprouting.

What is the mix ratio for glyphosate?

Mixing Directions: For best results use 2 ½ fl. oz. (5 Tbs) per gallon of water. One gallon of water will treat approximately 300 sq ft.

How long does tordon stay blue?

Tordon is an excellent solution for eliminating unwanted trees, invasive woody vines, and shrubs when used as directed. Just 2 months after using Tordon on the Chinese elm pictured below, the blue color has faded, and the tree is completely dead.

How long does Tordon stay blue?

How long does tordon stay in the soil?

The break- down rate depends on rainfall, soil temperature and how these factors impact soil microorgan- ism activity — the main cause of breakdown. The time required to break down 50 percent of the active ingredient ranges from 1 week to 4 months.

What is the mix rate for 41% glyphosate?

Mixing Directions: For best results use 2 ½ fl. oz. (5 Tbs) per gallon of water.

How much do you dilute glyphosate?

Dilution rate*: 25 ml per 1 litre of water. 1 litre will cover 50 m². *Recommended dilution rate for perennial grasses and broad-leaved weeds on natural surfaces, hard surfaces and amenity vegetation. (For annual weeds, use a dilution rate of 15 ml per 1 litre of water.)

How long does tordon last in the soil?

What kind of herbicide does Tordon 22k use?

Tordon ® 22K herbicide offers the rate flexibility needed to nip new leafy spurge patches in the bud or to finish off large established patches thinned by broadcast applications of Graslan ® L herbicide.

Why are Tordon herbicides classified as restricted use?

Tordon herbicides are classified as restricted- use pesticides because of their ability to injure susceptible plants at extremely low rates. The rigorous training required for state certification helps ensure that applicators apply Tordon properly, limiting the potential for damage to nontarget vegetation.

What is Tordon and what is it used for?

Tordon is a herbicide meant for woody plants. Generally speaking, this means invasive trees. However, there are other woody plants out there as well. It is worth mentioning that Tordon is the name of the product that contains picloram as well as other ingredients.

What kind of herbicide is Tordon brushkiller XT?

Herbicide Tordon Brushkiller XT herbicide is used for the control of a wide range of brushweeds. Jump to: Crops Tech Specs Target Weeds