## How do you find the tonnage of a carrier chiller?

Find the model number. Within this string of letters and numerals, you should find an even, two-digit number. The possibilities on residential units range from 18 to 60. Divide the number by 12 (which represents 12,000 Btu/hr, or one ton of cooling capacity) to get your AC unit’s tonnage.

What is a carrier chiller?

Carrier is an industry leader offering all types of chillers with a wide capacity range and environmentally balanced refrigerant. Carrier innovative chiller solutions are “Designed for Tomorrow” due to the sustainable benefits of efficiency and reliable cooling for all types of process and commercial applications.

### How do Carrier chillers work?

How It Works. During cooling only operation, the chiller produces a controlled source of chilled water leaving the evaporator while dissipating heat through the condenser and ultimately to the environment.

How many tons is 2600 square feet?

ZONE 1 ZONE 3
3 Tons 1501 – 1800 sf 1601 – 1900 sf
3.5 Tons 1801 – 2100 sf 1901 – 2200 sf
4 Tons 2101 – 2400 sf 2201 – 2600 sf
5 Tons 2401 – 3000 sf 2601 – 3200 sf

#### How many BTUs is a ton?

12,000 Btu/
Air conditioners work something like blocks of ice in that they don’t produce cool air, but rather remove heat from the building. The capacity of an air conditioner refers to the amount of heat it can remove. Rounding up 11,917 Btu/hr gives you 12,000 Btu/hr, which is one ton of air conditioner capacity.

What is cooling capacity in kW?

The cooling capacity of 1 ton is equal to 3.517 kilowatts of power. For 1.5 ton AC, the power consumption is the same as the cooling capacity. There was a value of 1.5* 3.517/2.954 kilowatts. The outdoor unit is called the Compressor while the indoor unit is called the Evaporator.

## What is water-cooled chiller?

Water-cooled chillers feature a water-cooled condenser connected with a cooling tower. They have commonly been used for medium and large installations that have a sufficient water supply. A typical water-cooled chiller uses recirculating condenser water from a cooling tower to condense the refrigerant.

What is water-cooled centrifugal chiller?

A centrifugal chiller uses the vapor compression cycle to chill water. It throws off the heat collected from the chilled water plus the heat from the compressor to a water loop. The water loop is cooled by a cooling tower. Centrifugal chillers are popular because they have relatively few moving parts.

### What is chiller components?

Chillers consist of four basic components; an evaporator, a compressor, a condenser, and an expansion unit. Every chiller system contains a refrigerant. The process starts with a low-pressure refrigerant entering the evaporator.

How many square feet can 1 ton cool?

When calculating residential cooling capacity, it’s common to assume an HVAC unit can cool 400 square feet per ton of air conditioning capacity. Given the Las Vegas climate, this number can reach a maximum of about 600 square feet per ton for most buildings.

#### How many sq ft are in a ton?

600 sq ft
Tonnage Table

Area (Square Feet): BTU Tonnage
600 sq ft 12,000 BTU 1 Ton
900 sq ft 18,000 BTU 1.5 Tons
1,200 sq ft 24,000 BTU 2 Tons
1,500 sq ft 30,000 BTU 2.5 Tons

What are the components of a chiller?

Chillers – Main components. The main chiller components are the Compressor, Condenser, Evaporator, Expansion Valve, Power Panel, Controls unit and the Water Box.

## What is air cooled chiller used for?

Air-cooled chillers are refrigeration systems used in both commercial and industrial facilities to cool fluids and/or dehumidify air.

How do commercial chillers work?

How does a commercial chiller work. A chiller is a machine that removes heat from a liquid via a vapor-compression or absorption. In this case the condenser does not cool the hot refrigerant with ambient air, but uses water that is cooled by a cooling tower. A vapor-compression chiller uses a refrigerant internally as its working fluid.

### What is liquid chiller?

A liquid (glycol based) chiller with an air cooled condenser on the rooftop of a medium size commercial building. In air conditioning systems, chilled water is typically distributed to heat exchangers, or coils, in air handlers or other types of terminal devices which cool the air in their respective space(s).