How do I setup my Panasonic IP phone?

Registering Panasonic IP Phone to S-Series IPPBX

  1. Start up the Panasonic IP phone and identify its IP Address: Press [Menu] Find [System Settings]->[Network Settings]->[IPv4 Settings]->[Static]
  2. Open the web service for the Panasonic VoIP phone. Press [Menu]
  3. Log in the Panasonic IP phone web interface.

How do I turn off call forwarding on my Panasonic KX nt553?

  1. Press the PROG soft button (S1).*1.
  2. Press [ENTER].*2.
  3. Press [CANCEL].*1.
  4. Press the PROG soft button (S1).*1.
  5. Press [ENTER].*2.
  6. Press [ENTER].*2.
  7. Press [CANCEL].*1.

How do I change my voicemail on my Panasonic KX nt553?

Panasonic: Change the temporary voicemail message

  1. [Voicemail] You have zero new messages. To listen to new messages, press 1. To deliver a message, press 2.
  2. *4 is pressed* To change the personal greeting, press 1.
  3. *1 is pressed* To change the no-answer greeting, press 1. To change the busy-signal greeting, press 2.

How do I reset my Panasonic KX HDV230?

From the Panasonic KX-HDV230:

  1. Press the Menu softkey (middle softkey) at the bottom of the screen.
  2. Select System Settings from the menu.
  3. Enter #136 on the keypad.
  4. Select Yes when asked if you are sure you want to factory reset the phone.

How do I access the Web interface on my Panasonic KX HDV130?

How to Access the Web Interface of Your Panasonic KX-HDV130

  1. Press the Menu softkey button on the phone to bring up the menu.
  2. Press the Right Arrow twice to move to the third page of options.
  3. Select Basic Settings.
  4. Press the Right Arrow twice to move to the third page of options.
  5. Select Other Option.
  6. Select Embedded Web.

How do I reset my cordless phone?

Reset the cordless telephone base by unplugging the AC power for 15 seconds, then plugging the power in again.

How do I set up my Panasonic voicemail?

Set up voicemail

  1. Press Voicemail Message or HOLD/MSG on your phone.
  2. Enter the default voicemail passcode and press #.
  3. Enter your new passcode and press #.
  4. Record your first and last name, then press #.
  5. Press 1 to access the Voice Messaging main menu.

By Miscellaneous