Contents
What size drill bit do you need for a 5/16 tap?
What Size Drill Bit for 5/16″ Tap? The best overall size drill bit for the 5/16″-18 tap is 17/64″ drill bit, which corresponds to an F drill bit.
What drill is used to tap a 5/16-24 hole?
Tap and Drill Size Chart
| THREADSIZE | DRILL DIAMETER Coarse Thread | TAP DRILLSIZE |
|---|---|---|
| 5/16-24 | .2720 | ‘I’ |
| 3/8-24 | .3320 | ‘Q’ |
| 7/16-20 | .3906 | 25/64 |
| 1/2-20 | .4531 | 29/64 |
What size is a 5/16 drill bit in MM?
Drill Bit Size Chart
| Size | Decimal Equivalent | Size |
|---|---|---|
| 91 | 0.0083 | 7.75 mm |
| 90 | 0.0087 | 7.80 mm |
| 89 | 0.0091 | 7.90 mm |
| 88 | 0.0095 | 5/16″ |
What is the size of tapped hole?
Metric Threads
| Thread | Drill size for tapping standard metric threads | Clearance hole |
|---|---|---|
| M1 | 0.75 | 1.2 |
| M1.2 | 0.95 | 1.4 |
| M1.4 | 1.1 | 1.6 |
| M1.6 | 1.5 | 1.8 |
What size is a 5mm drill bit in inches?
Drill sizes to 1″ diameter
| Drill sizes to 1″ diameter Legend Fractional Inch Letter Drill Millimeters Number Drill | ||
|---|---|---|
| Millimeters | Inches | Designation |
| .4572mm | .018″ | #77 |
| .5mm | .0197″ | |
| .508mm | .02″ | #76 |
What’s a 5/16 drill bit?
| Drill Bit Hole Diameters | ||
|---|---|---|
| Metric Size | Fractional Size | |
| 9 mm | .3543 | 9/32 |
| 10 mm | .3937 | 19/64 |
| 11 mm | .4331 | 5/16 |
What can I use if I don’t have a 5/16 drill bit?
5/16 converts to 10/32. Assuming your bit set is that granular, the next larger size is 11/32, and the next smallest size is 9/32. Those aren’t necessarily common sizes, however. The next size up in x/16 would be 6/16, which is 3/8.
What size is a 5mm drill bit?
What size is 5 mm drill bit?
Drill sizes to 1″ diameter
| Drill sizes to 1″ diameter Legend Fractional Inch Letter Drill Millimeters Number Drill | ||
|---|---|---|
| Millimeters | Inches | Designation |
| 5mm | .1969″ | |
| 5.0546mm | .199″ | # 8 |
| 5.1054mm | .201″ | # 7 |
How many MM is a 1/8 drill bit?
Fractional inch drill bit sizes
| Drill size | Diameter (in) | Diameter (mm) |
|---|---|---|
| 1/8 in | 0.1250 | 3.1750 |
| 9/64 in | 0.1406 | 3.5719 |
| 5/32 in | 0.1563 | 3.9688 |
| 11/64 in | 0.1719 | 4.3656 |
What size hole to drill for tap?
Drill the tap hole: The size of the drill bit to be used is dependent on the type of spile you are using. Most spiles require either a 7/16 or 5/16 bit. Drill a hole 2 to 2 ½ inches deep.
What size drill do you use for tap?
Drill Bits and reamers. The two most common methods of creating starter holes for taps are drilling with just a drill bit or drilling with both a bit and reamer.
What are the standard drill sizes?
Range 1 (R1) is shortest in length, more common for sizing production tubing or casing, and ranges from 18 to 22 ft. Range 2 (R2) is considered the standard length for drill pipe and ranges from 27 to 31 ft. Range 3 (R3) is common in casing and also deployed in deep water drilling applications.
What size drill for tap?
Drill Bit Sizes (Metric) The drill size chart contains tools up to 1.5 inches in diameter,but larger tools are also commonly used.