What rear end does a 1993 F150 have?

Re: Rear-end 93 pretty much any 8.8 rear axle from a 87-96 F150 with 3.55’s will work. If you have ABS, make sure the replacement axle has the ABS sensor. It’s located on the very top of the pumpkin, above the cover.

How do I know what differential my F150 has?

How Do I Identify the Limited Slip Rear Axles of a Ford 150?

  1. Locate the vehicle certification plate located on the inside edge of the driver’s door near the door latch.
  2. Locate the information at the area on the tag marked “axle,” or “ax.” Write it down.

What is axle code 3E?

In the case of a Ford F-250, an axle code of 3E indicates that You’ve for a 3.73 electronic locking axle, and that the vehicle belongs to the 2011 model year. Ford F250 axle code 3E means the vehicle has a 4.30 gear ratio and Limited slip.

What is axle code l9?

The code l9 is associated with a 3.55 electronic locking differential on the 2018 Ford F-150. The code l9 is associated with a 3.55 Electronic locking differential on the ford f-150.

How do I know if I have 8.8 or 9.75 rear end?

On the passenger’s side upper and lower corners, there’s two semi-circular divots that can easily be seen when looking at the cover from straight on. While the Super 8.8’s cover has a bulge for the ring gear, it’s not anywhere near as pronounced as the 9.75’s.

What is Ford axle Code 19?

Identify Your Ford Truck Axle From The Door Sticker

Axle Code (Door Sticker) Axle Gear Ratio
18 Ford 8.8 3.08
19 Ford 8.8 3.55
22 Dana 4.10
23 Dana 60 3.54

What does axle code l9 mean?

If Your 2014 Ford F-150 has a code l9 that means that Your rear axle’s gear ratio iS3. 55 and that it has an electronic locker. The use of a locker is better for off road and low traction situations.

What does Ford axle code l9 mean?

What is Ford axle code H9?

The Ford F-150 axle code H9 indicates that the truck has a limited slip differential wit a 3.55 gear ratio. A limited slip differential has the ability to shift the amount of power to one tire or the other depending on the amount of traction and slippage that is occurring.

What is the Ford Axle code for 1991?

Ford Axle Code Chart. Axle Decoder Chart Code Ratio Capacity Maker Type Yr 12 2.73 3800 FORD REG 1991 17 3.25 3300 FORD REG 1971 17 3.31 3800 FORD REG 1995 18 3.08 3800 FORD REG 1991 19 3.55 3800 FORD REG 1991 25 4.10.

What is the Axle code for a 2008 Ford truck?

2008 Ford Super Duty Axle Codes: 35 = 3.55 non-limited slip 3J = 3.55 limited slip 37 = 3.73 non-limited slip

Where is the Axle code on a Ford Ranger?

The code appears as a number or letter/number combination in the ‘Axle’ column of the label. If you look at the ‘AXLE’ section on the label above, you’ll see that this Ranger has a ‘F7’ axle code. Using the chart below, we know that this axle is a 7.5-Inch axle with a 4.10 limited slip.

How to identify the axle on a Ford truck?

Identify Your Ford Truck Axle From The Door Sticker There’s no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below: You’ll see that the area labeled (F) is for the Axle Code.