What is an offset cabinet hinge?

Offset cabinet hinges mount to the cabinet door frame and surface of the cabinet door, and are used when cabinet doors project out from the surface of the frame. Made from solid brass and available in a variety of sizes and attractive finishes.

What is a 3/8 inch inset hinge?

Low-profile hinge with only the 2″ long barrel showing.

How do I know what offset my hinge is?

FOR CASE-MOUNT HINGES: Measure from the casing (B) to the back of the wood (A). This dimension is considered your offset and is used when selecting hinge offset. FOR JAMB-MOUNT HINGES: Measure from the back of the inside edge of the casing (C) to the back of the wood (A) and then add the thickness of the shutter.

What size hinge do I need?

Hinge Size As a rule, use one hinge per every 30 inches of door: Doors up to 60 inches need two hinges. Doors over 60 inches, but not over 90 inches, need three hinges. Doors over 90 inches, but not over 120 inches, need four hinges.

What type of hinges might you use on a lip door?

Lipped Doors These doors require an offset hinge, one that jogs around the edge of the lip in order for the door to lay flat. Offset hinges can be either surface-mounted or ‘half and half’—that is, mortised into the door’s backside and surface-mounted on the cabinet’s frame.

What is a lipped cabinet door?

The term lipped is used to describe kitchen cabinet doors. The term refers to inset doors which are designed to allow the door to sit flush directly into the frame. The lip refers to the way the doors retain an overlay on the cabinet face frame.

What is a wrap around hinge?

Partial wrap hinges have an extra-long leaf that wraps around the edge of the cabinet face frame of side panel. These specialty hinges can be surface-mounted on the door and the side panel of the cabinet or mortised into the door and the side panel.

What is latch offset?

Measuring Offsets – The offset of a surfacemount latch is the distance between the surface on which you mount the strike (the jamb) and the surface on which you mount the latch (the door).

What is a cabinet hinge?

A hinge is a piece of hardware vital to the proper function of a cabinet door. The two primary categories for hinges are visible and invisible. Visible hinges relate back to the original hinges that were forged by blacksmiths.

What is a full wrap hinge?

Full wrap-around hinges wrap all the way around three sides of the face frame to which the hinge is attached, which is great in terms of heavy or large doors that require additional strength to facilitate that weight. Partial wrap hinges have an extra-long leaf that wraps around the edge of the cabinet face frame of side panel.

What is an inset hinge?

inset hinges. A form of aerodynamic balance and a method of reducing hinge movement. The hinge line is set inside the control surface by 20 to 25% of the chord length, thus reducing the movement arm.

What is offset hinge?

Hinge Offset is the counterbalance needed for a shutter or door to easily swing open and close, clearing any obstacles such as a deep fitted window frame or trim mouldings. With a larger hinge offset a larger swing (also referred to as “throw”) is created making the shutter protrude, or kick out,…