- 1 What is a Sophos RED 50?
- 2 What is a Sophos RED device?
- 3 How do I find my IP address and port number?
- 4 Can I use any port number?
What is a Sophos RED 50?
The Sophos Remote Ethernet Devices (REDs) are a great way of securely expanding your network by connecting remote offices over the public Internet. The REDs come in two sizes: the RED 10 and RED 50. The RED spec sheet basically tells you that the RED 10 is for small branches and the RED 50 is for large branches.
What is a Sophos RED device?
Sophos Remote Ethernet Device (RED) is a small network appliance, designed to be as simple to deploy as possible. Its main purpose is to provide a secure tunnel from its deployment location to a Sophos XG Firewall. There is no user interface on the RED appliance.
How do I connect Red 50 to Sophos?
How to set up RED 50
- Branch name: Enter a name for the branch where the RED appliance is located, e.g. “Office Munich”.
- Client type: Select RED 10 or RED 50 from the drop-down list, depending on the type of RED appliance you want to connect.
- RED ID: Enter the ID of the RED appliance you are configuring.
Which 2 ports are used by the Red 15 and Red 50?
|RED 10||TCP 3400 + UDP 3400|
|RED 15||TCP 3400 + UDP 3410|
|RED 50||TCP 3400 + UDP 3410|
How do I contact Sophos support?
00 44 1235 465818
What ports are used by the red50?
RED 50 ports
- TCP port 3400 (Control Connection, using SSL, authenticated with mutual X509 cert check)
- UDP port 3410 (Encapsulated traffic, AES256 (enc), SHA1-HMAC (auth))
How do I get Sophos red unlock code?
If the device has been set up previously on another Sophos firewall, type the unlock code. The unlock code is sent to the email address that you provided when you turned on the RED provisioning service. Caution Retain the unlock code.
What is red interface?
A Remote Ethernet Device is a network appliance that provides a secure tunnel between a remote site and the firewall. Using RED interfaces, you can configure and deploy REDs or create a site-to-site RED tunnel between two firewalls in a client/server configuration.
How do I find my IP address and port number?
How do I find the port number of a specific IP address? All you have to do is type “netstat -a” on Command Prompt and hit the Enter button. This will populate a list of your active TCP connections. The port numbers will be shown after the IP address and the two are separated by a colon.
Can I use any port number?
Every protocol has a different default port, but programs are not required to use that. They can use any unused port between 1 and 65535 (16 bits unsigned = 2^16).
Who owns Sophos?
What is the Sophos remote Ethernet device ( red )?
Sophos Remote Ethernet Device (RED) is a small network appliance, designed to be as simple to deploy as possible. Its main purpose is to provide a secure tunnel from its deployment location to a Sophos XG Firewall. There is no user interface on the RED appliance. It is designed to be fully configured and managed from a Sophos Firewall.
How to configure Sophos XG firewall with red device?
This document explains how to configure a Sophos XG Firewall with a RED 50 or RED 60 device with VLANs. Enable RED service. System Services > RED tab. Create the RED interface. Network > Interfaces > Add Interface > Add RED. Fill out the information for the RED device as usual.
How to configure Sophos red 50 with VLANs?
Configure the RED, enter the RED ID, unlock code, add the UTM IP/hostname. Under Switchport configuration select VLAN for the LAN port mode. You can assign the interfaces as access ports, or you can configure it as a trunk. In this configuration, we chose to have LAN1 as a trunk port that passes on the VLANs to the downstream switch.
Can a DHCP router connect to the Sophos firewall?
DHCP can be offered for the remote LAN by the Sophos XG Firewall, and the RED may be the only device connecting the LAN to the Internet. While another router may sit in front of the RED, there is not a parallel path around the RED to the internet.