What do I do when my Epson printer says paper jam but there is none?

Generally, epson printer paper jam issue can be fixed by following tricks.

  1. Remove the printer header.
  2. Check if there is any broken paper available.
  3. try to move the roller gently to check if it moving properly or not.
  4. place the printer header back again. and reboot your printer once.
  5. now try to print something.

Why does my printer say paper jam when there is no paper jam?

The guides in the paper tray are there to make sure the stack of paper is exactly where the printer was designed to grab from. So even though there’s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.

How do I reset my Epson printer after paper jam?

Paper Jam Problems

  1. Cancel the print job from your computer, if necessary.
  2. Gently pull out any jammed paper from the output tray and sheet feeder.
  3. Press the start button to resume printing.
  4. Press the power button to turn the product off.
  5. Lift up the scanner unit, and remove the jammed paper and any torn pieces.

How do you get rid of a fake paper jam?

Neal Poole

  1. Take the first paper clip and contact the lower two brass rectangles, this fools the device into believing the duplexer is installed, keep the contacts bridged (don’t remove your hand or the paper clip until Step 4.)
  2. Press the “OK” button on the control panel to pretend the paper jam is cleared.

How do I reset my Epson printer?

To Factory Reset an Epson printer:

  1. Turn off the printer.
  2. Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
  3. Turn on the printer while holding the reset button.
  4. Wait until a message prints indicating that the printer is resetting.

Why is my Epson printer not picking up paper?

If paper does not feed for printing, remove it from the rear feed slot or cassette. Make sure the paper stack is not above the tab on the edge guides inside the cassette or rear feed slot. If paper does not feed from the rear feed slot, try cleaning the paper guide using an Epson cleaning sheet.

How do I get my Epson printer out of error mode?

How to Fix Epson Printer Error State

  1. Step 1: Check all your connections. Check the hardware for any loose connections.
  2. Step 2: Reinstall/Update the Driver.
  3. Step 3: Our very own – Windows Troubleshooter.
  4. Step 4: If nothing seems to solve the error.
  5. Related Printer Error :

Where is the reset button on Epson printer?

Locate the control panel of your Epson printer. It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

How do you fix a paper jam error?

How to Fix a Paper Jam in a Printer

  1. Turn off and unplug the printer.
  2. Remove all printer paper from the tray and then reload it.
  3. Open the rear access door or duplexer (or any other doors that give you access to the paper’s path through the printer)
  4. Close the doors and plug in the printer.

Do all Epson printers have a reset button?

All the models of Epson printers have a factory reset button at the back of the body of the printer which can be used to reset the printer to factory settings. Use a pin to press and hold the Reset button at the back of the printer. Turn on the printer but keep the Reset button pressed for at least 5 seconds.

How to solve paper printer paper jam?

Resolving Printer Paper Jams Turn the printer off and unplug the printer from the AC outlet. Open the printer and check the paper path for a paper jam or misfeed. When the paper appears as crumpled or waded up, carefully remove all the jammed paper. When the paper appears to be angled incorrectly, it may be misfeeding through the printer, remove the sheet of paper.

How do you fix a paper jam in a printer?

Remove the two-sided printing accessory to clear the paper jam. Press both RELEASE buttons on either end of the module at the same time and remove it. Remove the panel and carefully pull out the jammed paper. Locate and clear away any small bits of paper that remain.

What is the most likely cause of Paper Jam on a Dos printer?

Sometimes a paper jam is the result of broken or damaged hardware; other times, a paper jam is a result of what’s called a “mechanism error.” Damaged Rollers or Open Doors When you send a job to the printer, the rollers pull the paper from your loaded paper tray and through the printer.

What are the causes of paper jams in a printer?

What Causes Paper Jams on Kodak Printers? Paper Type. If a certain type of paper keeps getting jammed in your Kodak printer, the printer may not support it. Loading Paper. Incorrectly loaded paper is a major cause of paper jams in any printer. Foreign Objects. Foreign objects that get stuck inside the printer will jam it. Correcting Paper Jams.

By Useful tips