What are the safe work practices when working with chemicals?

Reducing exposure to hazardous substances isolate hazardous substances in separate storage areas. purge or ventilate storage areas separately from the rest of the workplace. thoroughly train employees in handling and safety procedures. provide personal protection equipment such as respirators, gloves and goggles.

What are the safety measures for controlling hazardous chemicals?

Overview of Controls

  • Change process to minimize contact with hazardous chemicals.
  • Isolate or enclose the process.
  • Use of wet methods to reduce generation of dusts or other particulates.
  • General dilution ventilation.
  • Use fume hoods.

What are the proper handling and storage procedures for hazardous chemicals in your workplace?

Store all hazardous materials properly, separate incompatibles, and store in ventilated, dry, cool areas. Employees must keep themselves and the work area clean. After handling any hazardous material, wash thoroughly with soap and water. Clean work surfaces at least once per shift, so contamination risks are minimized.

What are three safety regulations when working with chemicals?

Basic Safety Rules

  • Know locations of laboratory safety showers, eyewashstations, and fire extinguishers.
  • Know emergency exit routes.
  • Avoid skin and eye contact with all chemicals.
  • Minimize all chemical exposures.
  • No horseplay will be tolerated.
  • Assume that all chemicals of unknown toxicity are highly toxic.

What would you do if the workplace is hazardous to your health?

If you spot something you think might be hazardous in your workplace, report it to your employer and safety rep straight away. Your employer should then decide what harm the hazard could cause and take action to eliminate, prevent or reduce that harm. Read more about risk assessments .

What is chemical safety guidelines?

General Chemical Safety Guidelines

  • Maintain an organized and orderly facility.
  • Communicate hazards to everyone in the facility.
  • Follow basic safety procedures.
  • Use engineering controls.
  • Use PPE as needed or required.
  • Follow requirements for high hazard chemicals.
  • Prepare for accidents and emergencies.

How do you control hazards and risks in the workplace?

Six Steps to Control Workplace Hazards

  1. Step 1: Design or re-organise to eliminate hazards.
  2. Step 2: Substitute the hazard with something safer.
  3. Step 3: Isolate the hazard from people.
  4. Step 4: Use engineering controls.
  5. Step 5: Use administrative controls.
  6. Step 6: Use Personal Protective Equipment (PPE)

When working with chemicals the best practice to avoid cross contamination is what?

Terms in this set (16) What is the difference between Cleaning and Sanitizing? How long can food that requires time-temperature control be left in the danger zone? When working with chemicals, the BEST practice to avoid Cross-Contamination is: Always keep Chemicals away from food.

Where can guidelines for safe handling of hazardous chemicals or substances be found quizlet?

Material safety data sheet, information about hazardous chemicals or other substances can be found in the MSDS.

What is safe chemical handling?

Here are some basic tips to keep in mind when handling potentially hazardous chemicals: Make sure you have been properly trained in the Hazard Communication Standard. Identify the chemicals you are using. Keep an inventory of all chemicals being stored at your workplace. Do not eat, drink or smoke near chemicals.

What are the common hazards and safe working practices in the workplace?

7 Types of Workplace Hazards and How to Prevent Them

  • Electrical Accident.
  • Exposure to Dangerous Chemicals.
  • Machinery & Tools Hazard.
  • Workplace Harassment.
  • Fire Accidents.
  • Workplace Theft.
  • Workers Existing Health Conditions.

What should be included in a safe work procedure?

Where control measures have been identified in the risk assessment, a Safe Work Procedure (SWP) must be developed and include the controls for the relevant task/activity involving the hazardous chemical. Storage, use, transport, disposal and any emergencies associated (e.g. spills) with the task/process must be addressed.

What are the rules for handling hazardous materials?

Rule #6. Use all materials solely for their intended purpose. Don’t, for example, use solvents to clean your hands, or gasoline to wipe down equipment. Rule #7. Never eat or drink while handling any materials, and if your hands are contaminated, don’t use cosmetics or handle contact lenses.

Is the absence of odor a reliable guide to exposure hazard?

The absence of odor is not a reliable guide to a safe concentration of airborne chemical in the lab. Concentrations detectable by odor vary according to the chemical and the ability of the individual to smell the chemical. Never rely on odor to determine exposure hazard.

Is the Safe Work Procedure a legal authority?

The Safe Work Procedures (Templates) presented herein are a sample guide to the subject matters and should not be considered as a legal authority It does not remove, replace, or alter our obligations under any health and safety legislation.

By Popular questions