Contents
How do I pair my British Gas Energy Monitor?
Press the top ‘menu’ button four times and the display will flash white and clear, before returning to display the pulsating blue antennae and ‘find’ on the screen. After 30 seconds the unit will pair back to the sensor and display the meter reading again.
How do I connect my smart meter to display?
It usually takes about three hours. Press and hold the power button on the back of your smart meter display to turn it on. To turn it off, press and hold the same button for five seconds. Each time you turn the smart meter display on, it will show ‘Welcome to IHD2’ then ‘Attempting to pair’.
How do I reconnect my British Gas smart meter?
Restore my gas supply using my meter
- Ensure that all gas appliances are switched off.
- Press button A on your gas meter to wake the screen.
- Press B on your gas meter.
- Press and hold A until you hear the supply come on.
How do I pair my Geo Energy Monitor?
Remove the cover from your transmitter by pressing the release catch on the back and sliding the cover up then hold down the button until you see red LED light. When you release the pair button the LED flashes as the transmitter pairs with the display unit. Your display should now read “Paired”.
How do you set up an energy monitor?
- Simple guide to setting up an Energy. Monitor.
- Step 1: Open the Box.
- Step 2: Attach the sensor.
- Step 3: Activate the transmitter.
- Step 4: Assemble the power supply.
- Step 5: Plug it in.
- Step 6: Start Saving.
Why is my British Gas smart meter not connecting?
If your smart energy monitor stops working check your power cable is inserted correctly and that your power supply is switched on at the wall. If it’s still not working, try using batteries. If batteries fix the issue, then the problem is with the cable.
Why is my smart meter monitor not working?
How do I pair my IHD with my smart meter?
Connecting your black IHD3
- Press Menu/OK to bring up the menu.
- Press the forward Arrow until you see Settings [OK]
- Menu/OK to select Settings.
- Press the forward Arrow until you see Switch on Wi-Fi and press Menu/OK.
- Press the forward Arrow until you see Join Network and press Menu/OK.
How do I reconnect my geo smart meter?
Unplug it from the mains and hold down the power button on the back for five seconds. Wait one minute, reconnect to power and switch it on.
How can I monitor my home electricity usage UK?
If you want to see how much a single appliance is using, a plug-in energy monitor is the easiest way. These units simply plug into the wall socket and provide a pass-through socket into which you plug your appliance. It’ll then show you figures like: Voltage.
How do I pair my IHD smart meter?
How do I reset my smart meter monitor?
To reset it it turn it right off by holding down the power button for 10 seconds and then power it back on again, it should work.
How to fix British Gas smart energy monitor?
Here’s how to fix this: 1 Unplug your smart energy monitor 2 Move it closer to your electricity meter 3 Plug your smart energy monitor back in 4 Wait seven days (most smart energy monitors re-start automatically within a week) 5 If it’s still not working after seven days, please contact our live chat agents
What can a smart energy monitor be used for?
Your smart energy monitor is for information only and should be used as a guide to manage your usage. Your smart meter sends the readings to us and are used to create your bill. When you set a budget on your smart energy monitor, you’re setting a target for how much you want to spend today, this week, or this month.
Why do we need a smart gas meter?
The smart meters make it simpler for you to control what you spend on your energy. With your new smart energy monitor, you can easily: • Set your budgetsfor gas and electricity
What does Green mean on British Gas monitor?
Green is low, amber is medium and red is high. Blue is for gas only. Please note: this is not available on all models. Watch guidance video (YouTube) for this monitor.