Contents
What is fabric spreading machine?
Fabric spreading is a process of laying fabrics on the cutting table prior to the cutting process is taken place. Traditionally spreading is done manually where a number of helpers and spreaders are needed to draw the fabric, to lay the fabric and control the fabric edge on one side.
What is spreading machine?
Automatic Spreading machines are used in the unwinding of large rolls of fabric. When using industrial machines and tools to produce garments, the fabric is often ordered in giant rolls and a spreading table is often used in order to evenly roll out and spread the fabric so that it can be cut for each garment piece.
What is fabric spreading method?
Fabric spreading means the smooth laying out of the fabric in superimposed layers (plies) of specified length. Knitted or woven fabrics are laid in one ply (single ply) or in several plies (multi lays) for simultaneous cutting in one operation. Fabrics are usually laid up manually.
What does a fabric spreader do?
Spreads face-to-face or face-up one way. Comes complete with everything you see in the photos including, bar, cones, etc. Item comes unassembled.
What are the advantages of automatic spreading machine with manual system?
Advantages Of Mechanical Spreading And Manual Fabric Spreading…
- High production is achieved by mechanical method.
- Arrangements available for counting number of plies.
- Cutting devices available at the end of each ply.
- Auto leveler available to flat the fabric.
- Photo-cells available for selvedge alignment.
What is manual spreading?
Fabric spreading process is a part of apparel manufacturing. This fabric spreading is done by manually or mechanically. In manual method; fabric spreading is done fully by hand or with the help of track.
What is spreading mode?
A spreading mode is the manner in which fabric plies are laid out for cutting. Two fabric characteristics that determine the spreading mode are the direction of fabric and the direction of the fabric nap.
What is fabric cutting?
Cutting fabrics Cutting is separating of the garment into its components and in a general form, it is the production process of separating (sectioning, curving, severing) a spread into garment parts that are the precise size and shape of the pattern pieces on a marker.
What are the requirements of fabric spreading?
Requirements of fabric spreading
- Alignment of fabric plies.
- Correct ply tension.
- Fabric must be flat.
- Elimination of fabric faults.
- Correct ply direction and adequate lay stability.
- Elimination of static electricity.
- Avoidance of fusion of plies.
- Avoidance of distortion in spread.
What is spreading and its types?
The spreads can be of two basic types: Flat spreads: All the plies are of the same length. Stepped spreads: This is built up in steps, with all the plies in one step having the same length. A stepped spread is generally used when there is imbalance between the quantities to be cut.
What is jute spreader machine?
A jute spreader machine is used to comb and open the pieced out of long reeds of jute. It is done by combing action on the jute. To convert them into an even and continuous sliver that receives an even application of batching emulsion. To prepare a ribbon-like sliver jute spreader machine is used.
How many types of spreading are there?
What do you mean by automatic fabric spreading machine?
Fabric Spreading Machine: Automatic fabric spreading means the smooth laying out of various types of fabric according to specific length. Fabric Spreading Machine is one type of machine by which the smooth laying out of various types of fabric according to specific length automatically instead of pulled by workers.
Which is the best way to spread fabric?
Fabric spreading can be done very quickly. Less labor cost by spreading of fabric. To easily pull spread fabrics by blowing device, pulling and cutting fabrics at the same time, largely raising work efficiency. Thickness of spreading table is 28cm with several boards. Surface is stuck imported strong material.
How many people do you need to spread fabric?
The spreading mode is also generally nap-one-way face-one-way. The cheap labor provides the major reason for the existing mode of spreading and also the use of fabric spreading machine can be avoided for the same reason. The spreading of a lay requires 3-8 people for laying, depending on the marker mode and the size of the lay.
Do you need power to use fabric spreader?
Fabric spreading that is done correctly ensures a precise surface to work with. Cutsew proudly sells APEX brand spreaders. The majority of APEX spreaders are manual and require no power source. Not only is this better on your power bill, but it’s also better for the environment.